HM-C800B 8E1 to Ethernet Converter
Model: HM-C800B
Function: Ethernet over 8E1 solution
-
Courier delivery
Our courier will deliver to the specified address
5-7 Working Days
From $40
Humanity HM-C800B 8E1 to Ethernet converter realizes Ethernet transmission over 1~8E1.
This model complies with GFP, VCAT, LCAS and able to work with third party device followed same protocol.
Main Features
- Realizes Ethernet transmission over E1
- Comply with ITU-T G.7041, G.7042, G.7043, G.8040. It’s able to work with third party device followed same standard ITU protocol.
- Support auto delete the fault E1 channels. Auto in use after E1 is normal.
- E1 can not connect according to serial number. In case one E1 failure, the other E1 can still work.
- For 8E1 channels, the maximum tolerable time delay difference between any two can be up to 220ms.
- Chassis type supported
- MBTF: 50000hours
E1:
8xE1
Connector: DB37. Offer DB37/RJ45 or DB37/BNC adaptor
Impedance: 120ohm or 75ohm
Line code: HDB3
Comply with ITU-T G.703 standard
Jitter comply with ITU-T G.823 standard
Ethernet:
4xEthernet with VLAN
Comply with IEEE802.3, IEEE802.1Q
Connector: RJ45
Auto adapt 10/100M, full/half duplex
Support MDI/MDIX
MAC address table capability: 1024
Minimum frame length: 64bytes
Maximum frame length: 1916bytes
LED indicators:
POWER
Ethernet: LINK1-4, BT1-4
E1: ALR, L01-L08, LOS,AIS,LOOP,LOF
* ALR is general alarm
* L01-L08 is for alarm E1 channel
Choose Local/remote alarm
Choose CONSOLE/SNMP management
Set E1 loop
Set VLAN
Management:
Default with console management
SNMP option, please choose the right one when in order.
Power:
AC220V and DC-48V
AC220V power range: AC90V~AC260V
DC-48V power range: DC-36V~DC -72V
Less than 10W
Working temperature: -5 ~ 50℃
Relative humidity: ≤95%, non-condensing
